Lavina S7 Propane Grinders

Superabrasive manufactures the LAVINA range of propane grinding and polishing machines.

LAVINA grinders are planetary, i.e. they are driven by belts and/or chains and pulleys with a large primary grinding head and three smaller satellite heads that hold the diamond tools. When the grinder is operating, the satellite heads rotate in the opposite direction of the main head which eliminates “rows” or linear grinding marks in the floor.

Three-head planetary grinders usually outperform other equipment on polishing jobs, because they follow the floor high and low spots better, providing a more consistent finish.

Please give us a call for all rental 866-932-8324

L20S7

Propane Floor Grinder L20GS7
20 in / 510 mm

The all-new 20-inch LAVINA S7 propane Grinder is the latest addition to the Lavina S7 lineup. It combines the compact 20-inch footprint with the new S7 features and upgrades to deliver superior performance.

Engine: Kawasaki FS481V, 603 cc (18 hp / 13 kW)

NEW SEALED & DUST-PROOF GRINDING HEAD

  • Overlap around 25% of the machine work path between passes.
  • Check dust skirt to make sure it is all the way down, touching the floor to reduce airborne dust. Replace skirt if worn out or damaged.
  • When starting machine, hold it firmly and start moving (don’t keep it in one spot while heads are spinning).
  • When stopping machine, keep moving until the grinding heads stop.
  • To tilt machine up for tooling changes, move the weight back.
  • To add more grinding pressure and grind more aggressively, put the weights down / forward.

NEW FRAME DESIGN

  • Better control, easier tool changes, and less vibrations.
  • New weights for faster position change
  • Redesigned frame allowing easier tool changes
  • Ergonomic handle design for faster adjustability and more positions
  • Rubber bushing used at head attachment points for less vibrations for user

GRINDING TIPS

  • Overlap around 25% of the machine work path between passes.
  • Check dust skirt to make sure it is all the way down, touching the floor to reduce airborne dust. Replace skirt if worn out or damaged.
  • When starting machine, hold it firmly and start moving (don’t keep it in one spot while heads are spinning).
  • When stopping machine, keep moving until the grinding heads stop.
  • To tilt machine up for tooling changes, move the weight back.
  • To add more grinding pressure and grind more aggressively, put the weights down / forward.

Propane Floor Grinder L25GKS7
26.5 in / 673 mm

The all-new 20-inch LAVINA S7 propane Grinder is the latest addition to the Lavina S7 lineup. It combines the compact 20-inch footprint with the new S7 features and upgrades to deliver superior performance.

Engine: KOHLER PCV740, 747 cc (24 hp / 3600 min).
Also offered with Kawasaki FX600V (19 hp): L25GS7 – $21,490.00

NEW SEALED & DUST-PROOF GRINDING HEAD

Longer service life and less maintenance.

  • Completely redesigned chain-driven planetary drive
  • New stronger timing belt
  • Upgraded shafts, seals and bearings
  • New lighter timing pulleys for better power transmission
  • New 2-piece aluminum main belt housing with belt inspection cover for longer belt life and less maintenance

NEW FRAME DESIGN

Better control, easier tool changes, and less vibrations.

  • New weights for faster position change
  • Redesigned frame allowing easier tool changes
  • New ergonomic handle design – faster adjustability and more positions
  • Rubber bushing used at head attachment points – less vibrations for user
  • Water tank cap
  • Internal storage compartment

Propane Floor Grinder L31GS7
31 in / 783 mm

L31GS7 is a new addition to the LAVINA S7 lineup – a 31″ propane floor machine, designed for heavy duty grinding. It is equipped with a powerful Vanguard 35 hp engine, updated planetary drive and option to add more weight. With plenty of torque to handle any job, this machine is a beast.

Engine: VANGUARD, 993 cc (35 hp / 26 kW)

NEW SEALED & DUST-PROOF GRINDING HEAD

Longer service life and less maintenance.

  • Completely redesigned chain-driven planetary drive
  • New stronger timing belt
  • Upgraded shafts, seals and bearings
  • New lighter timing pulleys for better power transmission
  • New 2-piece aluminum main belt housing with belt inspection cover for longer belt life and less maintenance

NEW FRAME DESIGN

Better control, easier tool changes, and less vibrations.

  • New weights for faster position change
  • Redesigned frame allowing easier tool changes
  • New ergonomic handle design – faster adjustability and more positions
  • Rubber bushing used at head attachment points – less vibrations for user
  • Water tank cap
  • Internal storage compartment

X