Phoenix, Arizona · Equipment · Blades & Tooling · Rentals · Service & Repair
| Application | Concrete Control Joint Filling |
|---|---|
| Use | Joint Protection and Edge Spalling Prevention |
| Sizes | 600 mL Cartridge, 10 Gallon Kit |
| Formulation | Two-Component, 100% Solids Polyurea |
| Mix Ratio | 1:1 by Volume |
| Shave TIme | As Soon as 30 Minutes |
What is this for?
Filling and protecting interior concrete control joints in warehouses, industrial facilities, and commercial floors exposed to forklift and heavy equipment traffic.
Pricing and availability confirmed by our team.
| Application | Concrete Control Joint Filling |
|---|---|
| Use | Joint Protection and Edge Spalling Prevention |
| Sizes | 600 mL Cartridge, 10 Gallon Kit |
| Formulation | Two-Component, 100% Solids Polyurea |
| Mix Ratio | 1:1 by Volume |
| Shave TIme | As Soon as 30 Minutes |
Interior Concrete Control Joints
Industrial Concrete Floors
Warehouse Floors
Food-Related Facilities
High-Traffic Concrete Floors
Forklift Traffic Areas
Commercial Concrete Slabs
Semi-rigid polyurea formulation
Supports concrete joint edges to minimize spalling
Withstands heavy forklift and industrial traffic
Shavable in as little as 30 minutes
Ready for heavy traffic in less than two hours
Moisture-insensitive during and after curing
Resistant to ultraviolet exposure
Accommodates slight joint movement and vibration
Available in multiple colors
Suitable for food-related environments under the manufacturer’s stated conditions
The Bladz Guy
Know the material. Match the blade. Run it right.
Tell us the material, your machine and the blade size. We’ll recommend the right blade
A rental goes smoother when the setup is planned before pickup. Checklist Square footage and surface condition, so tooling can be matched. Propane: which tank the machine uses and whether you need one. Dust collection to pair with the grinder.
We can’t diagnose before inspection, but good information up front helps us plan parts and the next step. Have this ready Manufacturer and model. Serial number (photo of the plate is ideal). What happened and when it started. Any noises,
Tooling choice depends on what’s on the surface and where you want to end up. Removing epoxy calls for aggressive segments; fine grinding before polish calls for a continuous rim or finer tooling. Tell us Surface condition — coatings, glue,




Tell us the material, machine, dimensions and desired result. We’ll explain fit, limitations, pricing and availability.