Phoenix, Arizona · Equipment · Blades & Tooling · Rentals · Service & Repair

Superabrasive

SP3 Walk-Behind Trowel, 36″

US MSRP $2,990

SP3 is powered by a Honda GX160 single-cylinder gasoline engine, delivering 4.8 HP for reliable concrete finishing performance. Its 36-inch working width and adjustable rotor speed of 90–135 RPM provide efficient and controlled operation.

Engine Honda GX160
Engine Power 4.8 hp / 3.6 kW
Engine Capacity 163 cc / 9.95 cu.in.
Engine RPM 3600 rpm
Rotor RPM 90–135 rpm
Path Width & Rotor Diameter 36 in / 91 cm
Blades per Rotor 4

Key specifications

Manufacturer Superabrasive
Series SP
Model SP3
Power Gasoline
Working Width 36 in / 91 cm
Engine Honda GX160, 163 cc, 4.8 hp / 3.6 kW
Engine RPM 3600 rpm
Rotor RPM 90–135 rpm
Rotor System Single rotor
Rotor Diameter 36 in / 91 cm
Blades per Rotor 4
Fuel Type Gasoline
Fuel Tank Capacity 0.82 gal / 3.1 L
Machine Weight 203 lbs / 92 kg
Machine Dims (Work Mode) 79 x 29.5–45.3 x 39 in
Machine Dims (Transport Mode) 42 x 37 x 39 in
Optional Accessory Transport dolly jack (A151)
Application Concrete finishing

What this machine is for

  • Concrete finishing

Features

  • Rubber stop holds the machine securely in the service position, improving safety and stability during maintenance.
  • Handle design folds forward, allowing the machine to be safely laid on its side for blade, spider, and bottom-end service without lifting the unit. Compact folding handle has a convenient lifting point for forklift or crane handling.
  • Upgraded hardened steel thrust collar with rifled grease distribution improves lubrication efficiency and extends service life compared to bronze bushings.
  • Oversized main shaft with larger diameter reduces bending caused by transport, strapping, and vibration, helping maintain balance and extend service life.
  • Sealed main shaft assembly with O-ring seals to prevent moisture intrusion, reduce corrosion and shaft-to-spider seizure.
  • Built-in hour meter and tachometer allows accurate tracking of run time and engine speed, improving service interval management.
  • Reinforced gearbox and spider assembly designed for reduced maintenance and extended service life.
  • Improved grease fitting placement positioned farther out for easier access and more consistent lubrication.
  • Rotated engine orientation (180°) prevents oil migration and hydrolock when placed in service mode, while also improving balance.
  • Durable cam-based adjustment system resists wear compared to knurled or squeeze-style designs.
  • Improved machine balance –Engine offset slightly forward to better counter centrifugal and gyroscopic forces during operation.
  • Optional dolly jack for easy transportation (A151) – Front-mounted wheel kit slides beneath the machine, offering improved maneuverability.

The Bladz Guy

Bladz Guy explains

Not sure this blade fits your job?

Know the material. Match the blade. Run it right.

Tell us the material, your machine and the blade size. We’ll recommend the right blade

Need help choosing equipment?

Ask about pricing, a demonstration, or hands-on training on this machine.